B&B Bottom RV Trim Cover - Left Hand - 1-3/8"-1-1/2" x 12-1/2" - Fiji White

Video Transcript for Review of B and B Molders RV Trim - Plastic Molding - BM23XR

Hi, everyone. Steve here with etrailer.com. Let's take a look together at our B&B bottom RV trim cover for the left-hand side in Fiji White. Now folks, this does replace that bottom RV trim cover, again, on the left-hand side. It's designed to match the original and it is a color match finish in Fiji White. And as you can see, you've got four screw holes.

There's no hardware included. You would need to use your old hardware or source some new ones locally. Now, the manufacturer says this is 1 3/8 by 1 1/2 by 12 1/2. Now obviously, on my 13-inch rule, you can see angle to angle, it's a lot longer than 12 1/2, so I called them. What they're doing is they're going from the right angle here, from the center of the bolt hole up here and that's where they're getting their 12 1/2 inches on that right angle measurement.

Now, just for fun, for your viewing pleasure, if you will, I went ahead and measured from this angle to this angle, what I consider the longest part, and I got 17 3/4 inches overall on a full length corner to corner. So, hopefully between those two measurements, you can match it up. Also on the inside of here, it is molded into the plastic, LH for left hand, so you can also check the one you're replacing and making sure you're getting the right one to match your style. We do carry this on the right-hand side as well if needed, and we carry these in black color as well. I'm Steven, thanks for watching.

.